It often happen to carpenters , the ground is obviously uneven when they start to install cabinets. This problem greatly lower cabinet installation work efficiency. What should carpenters do when this problem occurs ?
They can handle it by adjusting cabinet position and angle to ensure that the cabinet is fixed in a horizontal state. The specific steps are as follows:
1.Adjust the position of the cabinet: First, the carpenter will use a floor level laser to check level of the cabinet. If the cabinet is found to be unbalanced, they will move the position of the cabinet to make it level. This may involve moving the cabinet forward or backward or adjusting the feet of the cabinet to accommodate the unevenness of the ground.
2. Adjust the angle of the cabinet: If the uneven ground makes it impossible for the cabinet to reach a level state by simply moving it, the carpenter may use more delicate angle adjustments. This may include using wooden blocks or other fillers under the feet of the cabinet to reach the indication of the floor level laser.
3. Fix the cabinet: Once the cabinet is level, the carpenter will use screws or other fixings to fix the cabinet to the ground. This step ensures that the cabinet can remain stable and level even if there are slight unevenness in the ground.
Note: During the adjustment process, carpenters need to be careful not to rely too much on fillers or adjustments to compensate for severe unevenness of the floor. If the unevenness of the floor is too great, other measures may need to be taken, such as using special shims or leveling under the floor to ensure the stability and life of the cabinet.
Through the above steps, carpenters can use a floor level laser to ensure that the cabinet remains level and stable even on uneven floors, thus completing the installation